2x2F Mechanical Switch 3V/5V Latching/Non-Latching
Hlink's FSW-2×2F Optical Switch, which is famous for its high performance, low insertion loss and compact .
This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal.
It is an ideal component for OADM, OXC, OLP system monitoring and protection
Hilink's 1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features:
High Channel Isolation
Low Insertion Loss
High Return Loss
Low PDL
High Stability and Reliability
Application:
Optical Amplifier
CATV Optical Link
Optical System testing
LAN
Broadcast Communication
| Hilink 2×2F Fiber Optical Switch - Specifications | |||
| Parameters | Unit | HL-FSW-2x2F | |
| Wavelength Range | nm | 850±40 / 1300±40 | 1260 ~ 1650 |
| Test Wavelength | nm | 850 / 1300 | 1310 / 1550 |
| Insertion Loss 1, 2 | dB | Typ: 0.8 Max: 1.2 | Typ: 0.8 Max: 1.0 |
| Return Loss 1, 2 | dB | MM ≥ 30 SM ≥ 50 | |
| Crosstalk 1 | dB | MM ≥ 35 SM ≥ 55 | |
| PDL | dB | ≤0.05 | |
| WDL | dB | ≤0.25 | |
| Repeatability | dB | ≤±0.02 | |
| Operating Voltage | V | 3 or 5 | |
| Durability | Cycles | ≥ 10 Million | |
| Switching Time | ms | ≤8 | |
| Optical Power | mW | ≤500 | |
| Operating Temperature | ℃ | -20 ~ +70 | |
| Storage Temperature | ℃ | -40 ~ +85 | |
| Relative Humidity | % | 5 ~ 95 | |
| Weight | g | 14 | |
| Dimension | mm | 27x12.6x8.0 | |
