1x2 Mechanical Optical Switch
The 1x2 fiber optic switch connects optical channels by directing or blocking an incoming optical signal into the output fiber.
It's a passive component used for OADM system, OXC, monitor system and experience.
Hilink1x2 Mechanical Optical Switch
Features:
Wide band operation
Low insertion loss & PDL
High cross talk
High stability and reliability
Path without epoxy
Application:
OADM
WAN
Laboratory
Monitory & detection
Parameters | Unit | HLFSW-1×2 | |
Wavelength Range | nm | 850±40 / 1300±40 | 1260 ~ 1650 |
Test Wavelength | nm | 850 / 1300 | 1310 / 1550 |
Insertion Loss 1, 2 | dB | Typ: 0.8 Max: 1.2 | Typ: 0.6 Max: 0.8 |
Return Loss 1, 2 | dB | MM ≥ 30 SM ≥ 50 | |
Crosstalk 1 | dB | MM ≥ 35 SM ≥ 55 | |
PDL | dB | ≤0.05 | |
WDL | dB | ≤0.25 | |
Repeatability | dB | ≤±0.02 | |
Operating Voltage | V | 3.0 or 5.0 | |
Durability | Cycles | ≥ 10 Million | |
Switching Time | ms | ≤8 | |
Optical Power | mW | ≤500 | |
Operating Temperature | ℃ | -20 ~ +70 | |
Storage Temperature | ℃ | -40 ~ +85 | |
Relative Humidity | % | 5 ~ 95 | |
Weight | g | 14 | |
Dimension | mm | (L)27.0×(W)12.6×(H)8.2 ±0.2 | |
Note: 1 Within operating temperature . 2 Excluding connectors. | |||
Hilink Ordering Information:
Fiber Type | Voltage | Switch type | Test Wavelength | TubeType | Fiber length | Connector |
SM:SM,9/125 | 3:3V | L:Latching | 850:850nm | 25:250um | 05:0.5m±5cm | FP:FC/PC,FA:FC/APC |
M5:MM,50/125 | 1310:1310nm | 90:90um | 10:1.0m±5cm | SP:SC/PC,SA:SC/APC | ||
M6:MM,62.5/125 | 5:5V | N:Non-latching | 13/15:1310/1550nm | X:Others | 15:1.5m±5cm | LP:LC/PC,LA:LC/APC |
X: Others | X:Others | X:Others | OO:None,X:Others | |||
