1x1 Mechanical Optical Switch
Hilink's 1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc.
It's a passive component used for OADM system, OXC, monitor system and experience.
Hilink 1x1 Mechanical Optic Fiber Mechnical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal.
Features:
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
Application:
Optical Amplifier
CATV Optical Link
Optical System testing
LAN
Broadcast Communication
Ordering Information:
Fiber Type | Voltage | Switch type | Test Wavelength | TubeType | Fiber length | Connector |
SM:SM,9/125 | 3:3V | L:Latching | 850:850nm | 25:250um | 05:0.5m±5cm | FP:FC/PC,FA:FC/APC |
M5:MM,50/125 | 1310:1310nm | 90:90um | 10:1.0m±5cm | SP:SC/PC,SA:SC/APC | ||
M6:MM,62.5/125 | 5:5V | N:Non-latching | 13/15:1310/1550nm | X:Others | 15:1.5m±5cm | LP:LC/PC,LA:LC/APC |
X: Others | X:Others | X:Others | OO:None,X:Others | |||
