10GBASE-T SFP+
Hilink 10G Copper RJ45 SFP+ is designed for 10G Ethernet 10GBASE-T links over Cat6 RJ45 copper cable. 30meter and 80meter available.
SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS pin for link indication. If pull up SFP's TX_DISABLE pin, PHY IC be reset.
Features:
Hot-pluggable SFP+ form factor
Compliant with SFF-8431 and SFF-8432 MSA standards
Compliant with IEEE 802.3az and 802.3an standards
Compliant with IEEE 802.3bz 5GBASE-T and 2.5GBASE-T standards
TX Disable and RX Los function
Fully metallic enclosure for Low EMI Emissions
Supports 100/1000BASE-T using Cat 5e cable or better
MDI/MDIX Crossover
Supports 10Gb/s data rate
Auto-negotiates with other 10GBASE-T PHYs
XFI/5GBASE-R/2500BASE-X/SGMII, SGMII Auto-Negotiation On
Access to physical layer IC via 2-wire serial bus
2.5W maximum power dissipation @30m
Compact RJ-45 connector assembly
Multiple Loopback Modes for Testing and Troubleshooting
Unshielded and Shielded cable support
Single 3.3V power supply
RoHS-6 compliant (lead free)
| Support | 10Gbase-T / 5Gbase-T / 2.5Gbase-T/1000Base-T |
| Transfer distance reach | 30 meter or 80 meter |
| RoHS | compliant and lead-free |
| Supply | 3.3V |
| Ambient Operating temperature | 0°C to +70°C |
